ماشین بالانس های دارای محور عمودی
Balancing machine with automatic unbalance correction equipped with an electro-pneumatic unit set up vertically. The unit is adjusted to the correct position through two manual slides both with a stroke of 300 mm. A linear encoder, integral to the unit allows to make holes with controlled depth and as strictly necessary for balancing, thus ensuring to obtain the highest possible balancing accuracy. The measuring and correction cycle is fully automatic
Balancing machine with automatic drilling machine with controlled axis.
The unit is mounted on two slides with recirculating ball feed screws: one vertical slide with stroke 250 mm and one horizontal slide with stroke 300 mm; both slides are controlled by motors with absolute encoders.
Balancing machine with manual drilling - milling unit.
Balancing machine equipped with milling/drilling unit able to balance rotors by a making drills vertically or at an angle or by contour milling.
The cutter spindle is controlled manually for the milling feed.
A rotary table allows milling tangential slots for correction of the unbalances.
Balancing machine for tools and toolholders used with high-speed production machines, balancing on two planes
Balancing machine for large size rotors or rotors with high windage effects, in one or in two planes